Steel silo roll forming machine mainly consists of the following parts:
1. Unwinding mechanism
Unwinder: used to carry and unwind steel coils, usually with automatic centering function to ensure that the steel coils maintain a stable position during the unwinding process.
Leveler: Level the steel plate after unwinding to eliminate the curling and deformation of the steel plate and ensure the accuracy of subsequent processing.
2. Forming mechanism
Roller unit: This is the core part of the steel silo roll forming machine, which consists of multiple rollers of different shapes and sizes. The rollers are arranged in a specific order, and the steel plates are gradually formed into the shape of a silo by gradually rolling them.
Guide device: During the rolling process, the steel plate is guided to ensure that the steel plate is formed according to the predetermined path to prevent deviation.
3. Transmission system
Main motor: Provides power to drive the operation of the roller unit.
Reducer: Reduces the speed of the main motor and increases the torque to meet the needs of roll forming.
Transmission chain or gear: Transmits power to each roller to ensure that the rollers run synchronously.
4. Control system
Electrical control system: PLC (Programmable Logic Controller) or other advanced control technologies are used to automatically control the operation of the entire equipment. Including motor start and stop, speed adjustment, roller pressure control, etc.
Operation panel: Provides a human-machine interaction interface, and the operator can set parameters and monitor the operation status of the equipment through the operation panel.
5. Shearing device
Size shearing machine: After the steel silo is formed, the silo is cut according to the set length to ensure that the length of the silo meets the requirements.
Waste collection device: Collect waste generated during the shearing process for subsequent processing.
6. Auxiliary device
Roller device: During the forming process, the steel plate is supported to prevent the steel plate from sagging and ensure the forming quality.
Lubrication system: Provide lubrication for each roller of the roller press unit to reduce wear and extend the service life of the equipment.
Safety protection device: Including protective cover, emergency stop button, etc., to ensure the safety of operators.
If you are interested in learning more about the main structure of the steel silo roll forming machine, etc., welcome to visit www.jr-rollformingmachine.com, where you can find industry information, product displays, etc. Our professional team is always on standby to provide you with tailor-made consultation and guidance.
