1. Equipment installation and commissioning
During installation, ensure that the equipment is placed on a stable and solid ground to avoid unstable equipment operation due to uneven ground.
Strictly follow the equipment installation instructions for installation, connect electrical lines, transmission components, etc., to ensure correct installation.
During the equipment commissioning stage, professional technicians should operate and adjust parameters such as roller spacing, pressure, speed, etc. to ensure that the equipment can operate normally and produce qualified purlin products.
2. Operational safety
Operators must undergo professional training and be familiar with the operation methods and safety precautions of the equipment. It is strictly forbidden for untrained personnel to operate the equipment. Necessary protective equipment, such as safety helmets, safety shoes, gloves, etc., should be worn during operation to prevent accidents. During the operation of the equipment, it is strictly forbidden to extend hands or other parts of the body into the rolling area to avoid personal injury. When the equipment fails or is in an abnormal situation, it should be shut down immediately and professional maintenance personnel should be notified for inspection and repair. It is strictly forbidden to dismantle the equipment or perform repairs without authorization.
3. Equipment maintenance and care
Perform regular maintenance on the equipment, check whether the connection of each component of the equipment is firm, whether the transmission components are well lubricated, whether the electrical system is normal, etc.
Clean up dust, oil and other impurities on the surface and inside of the equipment in time to keep the equipment clean.
Periodically inspect and maintain key components such as rollers. If they are worn or damaged, they should be replaced in time to ensure the molding accuracy and production efficiency of the equipment. Regularly inspect and maintain the electrical system of the equipment to ensure the safety and reliability of the electrical system.
4. Raw material selection and use
Choose raw materials that meet the requirements of the equipment. For example, the thickness and material of the metal sheet should meet the processing range of the equipment. The surface of the raw materials should be flat and free of obvious defects to avoid affecting the molding quality of the purlins. When using raw materials, attention should be paid to reasonable placement and feeding to avoid unstable equipment operation or production of unqualified products due to improper placement of raw materials or uneven feeding.
5. Production environment requirements
The equipment should be placed in a well-ventilated and dry environment to avoid environmental factors such as humidity or high temperature affecting the performance and service life of the equipment. The production site should be kept clean to avoid accumulation of debris that affects the operation and safety of the equipment. It is strictly forbidden to stack flammable and explosive items around the equipment to prevent fire or explosion accidents.
If you want to know more about the purlin roll forming machine, we sincerely invite you to visit our website www.jr-rollformingmachine.com!
