The maintenance points of the C purlin machine mainly include the following aspects:
Daily maintenance
Cleaning equipment: After the daily work, dust, oil, metal debris, and other debris on the surface of the equipment should be cleaned in time to prevent them from entering the inside of the equipment and affecting normal operation.
Check components: Check whether the connecting bolts of each component are loose. If they are loose, they should be tightened in time. At the same time, check whether the tension of the belt and chain is appropriate. If they are too loose or too tight, they should be adjusted.
Regular maintenance
Lubrication and maintenance: According to the requirements of the equipment manual, lubricate each lubrication point regularly. Generally speaking, an appropriate amount of lubricating oil or grease should be added every certain number of hours or days of work to reduce component wear.
Electrical system inspection: Regularly check whether the circuit of the electrical system is damaged or aging and whether the contacts of each electrical component are in good contact. If there is any problem, it should be replaced or repaired in time.
Special maintenance
Mold maintenance: The mold is a key component of the C purlin machine. After each use, clean the debris and residual metal chips on the mold surface, check the wear of the mold regularly, and repair or replace it in time if it is worn.
Hydraulic system maintenance: For C purlin machines with hydraulic systems, check the oil level and oil quality of the hydraulic oil regularly. Refill it in time when the oil level is too low, and replace it in time when the oil quality deteriorates. At the same time, check whether there is leakage in the hydraulic pipeline. If there is leakage, it should be handled in time.
If you have any questions or need more details about the C purlin machine, feel free to contact us, we will serve you wholeheartedly!
https://www.jr-rollformingmachine.com/
