Tile Roll Forming Machine

The tile roll forming machine uses GI/PPGI as raw materials, and through a series of processes, we can produce metal roof panels. Secondly, the frequency converter of our product controls the motor speed, and the PLC system automatically controls the length and quantity, so the efficiency of this equipment is very high. What's more, continuous automatic production is an ideal equipment for cold roll forming industry. If you are interested in our products, please contact and communicate with us in time.

Each forming head of tile roll forming machine consists of a fixed housing and a sliding outer housing. Second, our mill stands will be arranged to position shafts mounted on tapered bearings. For the top shaft, the bearings are mounted in cartridge housings, the bottom shaft bearings are in machined holes in the housing, the bottom mandrel is held in place, and the top mandrel with the cartridge block can be raised in vertical rails machined in the housing or lower. Finally, all of our raw materials are imported components, which are strong and durable.

1220mm Coil →Guided Feeding →Roller Molding →Cutting to Length → Collection Table

1. Feeding
Frame Structure: steel plate welded
Manual Pre-cutting Device
Roller Flatting System: let the feeding fluently

2. Roll Forming
The machine under Frame: 400 H-beam
Sidewall Plate Thickness: 16mm
Roller Station: 15
Shaft Diameter: 70mm
Main Shaft Material: 45# steel with finish turning
Roller Material: 45# Forging Steel with Chromium Plate
Chromium Wheel and Cycle Chain: 1 inch
Roll Forming Speed: 15-20m/min (adjusted with frequency changer)

3. Hydraulic Cutting System
It adopts a hydraulic drive and automatic location system to decide the dimension and cutting target.
Working Method: Stop to cut then post cut.
Hydraulic Tank: 1 set
Hydraulic Pump Station: 5.5kw
Cutting Length Tolerance: 10m+/-1mm
Cutting Material: Cr12 with quenched treatment 58-62 degrees.

4. PLC Control Cabinet
The target piece length is adjusted and the digit of it can be adjusted.
PLC Control Converter: Delta
Frequency Converter: Delta
Voltage: 3 phase/380V/50Hz (for confirmation)

5. Collection Table
Function: Collect the sheet
Length/set: 6 meters
Welded with square pipe

Hot Tags: tile roll forming machine, China tile roll forming machine manufacturers, suppliers, factory