As an important equipment for the production of rolling shutter doors, the rolling shutter forming machine has a good operating state that is directly related to production efficiency and product quality. Therefore, it is very important to perform scientific and reasonable maintenance on it.
1. Daily maintenance
Cleaning work: After each use, the dust, oil and debris on the surface of the equipment should be cleaned in time to keep the equipment clean. Special attention should be paid to cleaning the rollers, transmission parts, feed and discharge ports, etc. to prevent the accumulation of debris from affecting the operation of the equipment.
Check and tighten: Before starting the machine every day, check whether the connection of each part of the equipment is firm and whether the bolts and nuts are loose. If there is any looseness, tighten it in time to ensure the stable operation of the equipment.
Lubrication and maintenance: Regularly lubricate the transmission parts, bearings, chains and other parts of the equipment, select appropriate lubricants, lubricate according to the prescribed time and method, reduce wear and extend the service life of the equipment.
2. Regular maintenance
Roller maintenance: Regularly check the wear of the roller. If the roller surface is found to be severely worn or cracked, the roller should be replaced in time. At the same time, the rollers should be cleaned and maintained to remove oil and rust on the surface and maintain the smoothness of the rollers.
Electrical system maintenance: Regularly check whether the electrical system connection is good, whether the wires are damaged, and whether the plugs are loose. Check whether the buttons and indicator lights on the control panel are working properly. If there is a fault, repair it in time. Regularly check and maintain the motor to ensure that the motor operates normally.
Hydraulic system maintenance: If the equipment has a hydraulic system, regularly check whether the hydraulic oil level is normal and whether the hydraulic oil pipe is leaking. Regularly replace the hydraulic oil, clean the hydraulic oil tank and filter to ensure the stable operation of the hydraulic system.
3. Precautions
Operator training: Operators should undergo professional training and be familiar with the operation methods and maintenance requirements of the equipment. When operating the equipment, they should strictly follow the operating procedures to avoid equipment damage due to misoperation.
Safety protection: When performing equipment maintenance, safety protection should be paid attention to, such as cutting off the power supply and hanging warning signs. Avoid maintenance while the equipment is running to prevent safety accidents.
Record maintenance: Record the maintenance of the equipment, including the time, content, and parts replaced. This helps to understand the operating status of the equipment in a timely manner and provide a reference for subsequent maintenance.
In short, through scientific and reasonable maintenance, it can ensure that the rolling shutter forming machine is always in good operating condition, improve production efficiency, extend the service life of the equipment, and create greater economic benefits for the enterprise. If you are interested in learning more about the maintenance and maintenance methods of the rolling shutter forming machine, please visit www.jr-rollformingmachine.com!
