1. Before Operation
Training and qualifications: Operators must undergo professional training, be familiar with the operation methods, performance and safety regulations of the roll forming machine, and obtain the corresponding operating qualifications before they can start work. You must ensure that you fully understand the various functions of the equipment and the functions of the control buttons to avoid dangers caused by misoperation.
Equipment inspection: Before starting the machine, carefully check whether all parts of the equipment are normal, including whether the roller is damaged, whether the transmission parts are loose, and whether the electrical system is intact. For example, check whether there are cracks or severe wear on the surface of the roller. If there is a problem, the roller should be replaced in time to avoid failure during operation.
Protective devices: Confirm whether the safety protection devices of the equipment are complete and effective, such as guardrails, emergency stop buttons, safety interlocks, etc. The guardrails should be firm and reliable to prevent operators from accidentally contacting dangerous parts such as running rollers.
2. During Operation
Personal protection: Operators must wear personal protective equipment, such as safety helmets, safety shoes, gloves, goggles, etc. For example, there may be flying metal fragments or other debris during operation, and goggles can effectively protect the eyes from injury.
Operation specifications: Strictly follow the operating procedures, and do not change the equipment parameters or perform illegal operations without authorization. During the operation of the equipment, always pay attention to the operating status of the equipment, such as whether the speed, pressure, temperature, etc. of the roller are normal.
Material placement: Correctly place the materials to be processed to ensure that the materials are placed stably to avoid tilting or sliding during the rolling process. At the same time, pay attention to whether the size and thickness of the materials meet the processing requirements of the equipment to prevent overload damage to the equipment due to excessive size or thickness of the materials.
No touching: It is strictly forbidden to touch the operating rollers, transmission parts and other dangerous parts when the equipment is running. Even a roller that seems to rotate slowly may cause serious harm to the human body.
Abnormal handling: If the equipment is found to have abnormal conditions, such as abnormal noise, vibration, odor, etc., it should be stopped immediately and the relevant technicians should be notified for inspection and repair. Before the equipment is troubleshooted, it is not allowed to force the machine to start operating.
3. After operation
Shutdown operation: When shutting down, the power supply of the equipment and other related equipment should be turned off in the correct order to ensure that the equipment is completely stopped before subsequent operations. For example, turn off the main power switch of the roll forming machine first, and then turn off the power supply of auxiliary equipment such as the feeding device and the conveying device.
Equipment cleaning: When cleaning and maintaining the equipment, it must be done when the equipment is completely stopped and the power supply is cut off. During the cleaning process, be careful to avoid using sharp tools to scratch the surface of the equipment to avoid damage to the equipment.
Safe storage: Store tools and other items properly to avoid leaving them around or inside the equipment to avoid damage to the equipment or personal injury when the equipment is turned on next time. At the same time, keep the working environment around the equipment clean and orderly for easy operation and maintenance.
https://www.jr-rollformingmachine.com/
